Sum Check: Click on the check box to select the Sum Check option. The Baud Rate and the Transmission Speed MUST MATCH. This is the same as the Baud Rate value setting of the C-more Programming Software's Panel Manager window. Transmission Speed: Click on the down arrow to display the Transmission speeds available and select the desired Speed. Use Serial Communication: Click on the check box to select this option. To connect to the CPU Serial Ports of the Q00 CPU and the Q01 CPU, click on the Serial Tab so the Serial Communication selections are displayed as shown above. When PLC Parameter is selected, the Q Parameter Setting window shown below will open.Ĭonnect to the Q00 and Q01 CPU Serial Ports
To do this, open the MELSOFT Software and double-click on the PLC Parameter icon on the left side panel of the MELSOFT Software as shown below. To Configure the Mitsubishi Q/QnA Serial PLC to communicate with the C-more Panel, you will first need to find the Port Settings for your Mitsubishi PLC. Note: Remember to power cycle the PLC after making changes to the communication port settings. The C-morepanel is the master when communicating with a Mitsubishi PLC. The Serial Communications Modules supported for this driver are: Refer to Mitsubishi Q Series Compatibility Matrix to see what driver to use for the various CPUs and Communications Modules in the Mitsubishi Q series. For other Q Series CPUs, a Serial Communications Module can be used with this driver. This driver can be used to connect to the Serial Port on the CPU for the Q00 CPU and the Q01 CPU only.
The following information applies only to the Mitsubishi Q/QnA Serial PLCs compatible with C-more Panels. The Mitsubishi CPU types each have specific communication nuances that must be considered. Pay close attention to the compatibility matrix, configuration details, and limitations provided in this topic.
0 kommentar(er)
